UniSettle 4.0 Latest Release and History

The latest official release of UniSettle is 4.0.0.55.  The setup file may be downloaded by visiting:

http://www.unisoftgs.com/files/setup/UniSettle4/UniSettle4_Latest_Setup.exe


v.4.0.0.55 (January 29, 2017)

  • -Correct SI/US conversion and importing for culture using comma as a decimal separator

v.4.0.0.53 (November 22, 2016)

  • Improve connection to dataset

v.4.0.0.52 (September 26, 2016)

  • Adjust netwwork activation for Dropbox, OneDrive, and Google Drives

v.4.0.0.51 (July 23, 2016)

  • Improve activation procedure when using Map drive letter

v.4.0.0.50 (June 23, 2016)

  • Improve activation procedure for network license

v.4.0.0.46 (March 1, 2016)

  • Validate length of "Name" field to 50 characters

v.4.0.0.45 (October 7, 2015)

  • Update Setup for Windows 10 install
  • Add Project Name to all graphs
  • Correct Project Name entry when printing data and results

v.4.0.0.44 (April 12, 2015)

  • Improve precision of 2:1 stress distribution under narrow elongated footings

v.4.0.0.43 (February 11, 2015)

  • Add Network Users Management

v.4.0.0.42 (December 3, 2014)

  • Update grid control for compatibility with Chinese Windows 7/8 interface

v.4.0.0.41 (November 2, 2014)

  • Revise "Check for Latest Release" to visit html rather than pdf

v.4.0.0.40 (October 5, 2014)

  • Update "Check for Latest Release..." feature

v.4.0.0.39 (March 19, 2014)

  • Add time related settlement scale selection (days, months, or years)
  • Improve time scale in calculation of time related settlement
  • Increase time period precision to 2 decimals (i.e. 0.01)

v.4.0.0.38 (March 3, 2014)

  • Correct calculations of submerged excavations when negative GWT (i.e. lake condition)
  • Correct crash when importing UniPile data
  • Update toolbar for 125% fonts

v.4.0.0.37 (November 21, 2013)

  • Update for setup on Windows R8.1
  • Add online registration

v.4.0.0.36 (October 7, 2013)

  • Correct validation of recompression modulus at bottom of layer
  • Check vertical drain D/d > 2.117 limit

v.4.0.0.35 (June 28, 2013)

  • Correct effective stresses for loads with a negative depth
  • Add importing of UniPile 5.0 XMLU data
  • Correct Add/Delete Additional (X,Y) mesh points
  • Correct system error while importing XLMU data

v.4.0.0.34 (February 10, 2013)

  • Allow up to 200 additional individual mesh points in list
  • Improve validation of settlement parameters

v.4.0.0.33 (January 22, 2013)

  • Correct calculation of stresses from full and half embankment

v.4.0.0.32 (January 3, 2013)

  • Correct preconsolidation at layer boundary

v.4.0.0.31 (January 2, 2013)

  • Correct interpolation of soil parameters within layers

v.4.0.0.30 (December 17, 2012)

  • Correct pre-consolidation and overconsolidation for multiple loading/unloading
  • Revise Time scale in Settlement vs Time
  • Fix X-Scale for layer compression graph
  • Correct division by 0 when calculating settlement
  • Tweak effect of loads inside excavations

v.4.0.0.26 (October 3, 2012)

  • Correct crash when exceeding too many soil layers and other components

v.4.0.0.25 (September 14, 2012)

  • Revise units for Coefficient of Consolidation to use m^2/year and ft^2/year
  • Revise automatic TOP/BOT values soil input
  • Correct Copy and Paste of disabled load and excavation
  • Correct importing of non-hydrostatic pore pressure from UniSettle 3.0 files

v.4.0.0.24 (June 11, 2012)

  • Correct load integration steps (dL, dX, dY) input

v.4.0.0.23 (June 7, 2012)

  • Update exporting and importing of XMLU files
  • Correct numerical format for various culture
  • Remove gravity constant from user preferences
  • Add warning when void ratio (eo) = 0
  • Correct bug when setting (X,Y) Mesh
  • Correct occasional crash when viewing chart
  • Revise limited input in EDUCATIONAL Version

v.4.0.0.22 (February 28, 2012)

  • Release Educational Version

v.4.0.0.21 (January 28, 2012)

  • Update Unisettle4.chm to v.401
  • Update user manual to v.404
  • Correct access to Unisettle4.chm for network setup
  • Improve activation for network setup

v.4.0.0.20 (December 6, 2011)

  • Add printer setup feature for Windows Vista and Windows 7

v.4.0.0.19 (December 2, 2011)

  • Correct problem with page setup margin
  • Update Examples Manual

v.4.0.0.18 (November 23, 2011)

  • Revise calculation of Uavg to disregard negative compression caused by unloading.

v.4.0.0.17 (November 11, 2011)

  • Add preconsolidation effect to immediate compression

v.4.0.0.16 (October 4, 2011)

  • UniSettle 4.0 Official Release